Registering a Handset with the W60B

Registering a Handset with the W60B

How to register a Yealink handset with a single W60B or multiple base stations

The following steps may also apply to Yealink models W52B and W80B.

With a Single W60B

  1. Hold down the Connect button on the base until the top light of the three green lights starts blinking.
    w60b connect
  2. On the handset, there should be a message that states "Unregistered!". Press the button on the bottom left of the screen labeled Reg.
    reg button
  3. With the base in pairing mode, the handset with search for it, and attempt to connect automatically.
    searching for w60b
  4. Upon success, the phone will display a message confirming successful registration.
    handset subscribed

With Multiple Base Stations

  1. Press the OK button on the handset to open the phone's main menu.
    ok button
  2. Navigate to Settings and press OK.
    settings
  3. In settings, navigate down to Registration (or press 6 on the dialpad).
    registration
  4. Navigate to Register Handset.
    register handset
  5. On the Yealink Base, hold down the Connect button until the top green light starts flashing.
    w60b connect
  6. Select the next empty Base #.
    replace base
  7. Wait for the Searching dialog to complete.
    searching for w60b
  8. Press OK on the Subscribe Base screen, followed by your pin (default is 0000).
    subscribe base
  9. You should now be paired with the additional base.
    handset subscribed

    • Related Articles

    • How to Pair a Yealink Handset with the W70B DECT Base Station

      How to Pair a Yealink Handset with the W70B DECT Base Station On this page Procedure Procedure Before registering a handset, the base station will need to be placed in Registration mode. Enabling Registration Mode on the W70B Base Station Long press ...

    • How Factory Default Yealink W60B

      The following guide describes 2 different methods that you could use to factory reset a Yealink Base. This method can also be applied to the models: Yealink W52B and Yealink W80B. Method 1: From the Base Power off the unit by unplugging the power ...